Finding Ways To Keep Up With

Undergoung Utilities and their Standard Colors

It is now easier to know what an underground utility line is for. The risk was high before when people could not easily identify the type of utility lines underneath whenever they dig. Today, the risks have been lessened although not completely eliminated. It is thus important that we know how to identify these underground utilities if there is a need to dig the ground so that you can prevent harm. Before digging through a certain piece of land, the OSHA requires that the underground utilities be located. It is to prevent disaster. Fatal injuries can happen if underground utility lines are struck. The location of the areas where the lines were struck can experience service interruption. Before digging their property, people should call 811 to call the utility companies so that these incidents are prevented. Utility companies can then mark out their respective lines when you call them out.

But, despite the marks, there will sill be accidents. The reality is that there is an incident almost every 6 minutes where utility line are struck. When utility lines are stuck it causes disturbances in traffic lights wastewater pipes, telecommunication lines and more. These incidents affect public health and safety.

With the use of GPR or Ground Penetrating Radar, companies can locate utility lines. This has made it easier to locate utility lies underground and other important things. Companies can locate their utility lines if any property owner calls 811.

There are certain colors that mark different utility lines for easy identification. The colors below indicate the kind of utility uses it.

If you see white lines, then these are proposed excavation sites. It locates areas that will be excavated in the near future.

If you see pink lines, they are temporary survey markings. Surveyors use pink lines to mark off legal property boundaries.

Red lines are used to mark electric power lines, cable, conduit, and lighting cable. This color is appropriate for electrical works since it is associated with fire and danger.

If you see yellow lines, then they are lines for gas, oil, steam, petroleum, and gaseous materials. Bright yellow is an appropriate warning color since it is very disastrous to have a natural gas leak.

Communication, alarm, signal lines, cable, or conduit use orange lines. Lines for potable water use blue lines. If you see purple lines, that this is for reclaimed water, irrigation and slurry lines. If you see the color green, then it indicates sewer and drain lines. Hitting this line can truly derail any project for a long period of time.

You can learn more about the color coding of utility lines if you click here now! View here for more.